|
T30AF Product Information |
 |
|
|
|
|
Trend T30AF
|
|
|
|
|
|
The T30 extractor is designed to capture large and fine particles produced at source of machining. This ensures that particles do not become airborne where they can be inhaled or caught in the eye. The T30 captures particles by filtering the air through a paper bag, and finer dust particles are then removed by a cartridge filter. A pre-filter can also be fitted that extends the life and performance of the cartridge filter.
|
|
A 1200 watt bypass motor provides the power to the unit and an auto start facility allows direct connection of any 240 volt powertool up to 2000 watts. With the extractor set to automatic, the extractor will start up when the powertool is switched on. When switched off, the extractor will run on for a further six seconds to clear the hose. This auto feature saves unnecessary switching on and off, while the extra long cable (7.8m) avoids the need for an extension lead!
|
|
The extractor has a generous five metre x 36mm diameter flexible hose that has an integral swivel connector that fits Trend and other makes of routers. This extra length proves ideal for power sanding. An optional larger 58mm diameter hose enables direct connection to router tables and stationery machines, offering an increase in performance due to the larger volume throughput.
|
|
Includes
|
|
5 metre Hose
|
|
Floor kit with tubes & Adaptors
|
|
Crevice Tool
|
|
Upholstry Tool
|
|
Power Tool Adaptor
|
|
Paper Dust Bag
|
|
0.3 Micron Micro Cartridge
|
|
Nylon Pre Filter
|